Radio Shack 43-140 Скачать руководство пользователя страница 61

Страница: 61 / 68

Beyond.the.Basics

Symptom

Suggestion

The cordless

handset doesn’t

ring or receive an

intercom page.

The battery pack may be weak. Charge the

battery for 15-20 hours.

The cordless handset may be too far from

the base unit.

Place the base unit away from appliances

or metal objects.

Check the battery pack to ensure there is a

secure connection.

Make sure ringer volume is not set to off.

•

Severe noise

interference.

Keep the handset away from microwave

ovens, computers, remote control toys,

wireless microphones, alarm systems,

intercoms, room monitors, fluorescent

lights, and electrical appliances.

Move the base to another location or turn

off the source of interference.

•

The Caller ID

does not display.

The call was answered before the second

ring.

The call was placed through a

switchboard.

Your Caller ID service may not be active;

contact your local telephone service

provider.

•

The answering

machine does not

work.

Make sure the AC adapter is plugged into a

wall outlet.

Make sure the answering machine is

turned on.

•

The answering

machine does

not record any

messages.

Set the record time to either the one

minute or four minute option.

The memory may be full. Delete some or

all of the saved messages.

•

Messages are

incomplete.

The incoming messages may be too long.

Remind callers to leave a brief message.

The memory may be full. Delete some or

all of the saved messages.

•

UC044ZH_43-140_OM5.indd 61

12/18/2006 3:34:06 PM

Содержание 43-140





































































Результаты поиска

Содержание 43-140

Отзывы:

Похожие инструкции для 43-140

Бренды по названию

Популярные бренды

Radio Shack 43-140, Руководство пользователя

Результаты поиска

Содержание 43-140

Отзывы:

Похожие инструкции для 43-140

Бренды по названию

Популярные бренды