18
Telephone Operation
Notes:
• If you call a station that is using DND,
you hear a busy signal.
• If you are using DND when an intercom
call comes in, the intercom indicator
blinks rapidly and the caller's number
appears on the display. If you choose to
answer the call, press
INTERCOM
.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services by following these steps.
Dial the service's main number as usual,
then simply press
TONE/
∗∗∗∗
when the service
answers. Any additional keys you press are
sent as tone signals.
After you complete the call, hang up the
handset or press
SPKR
PHONE
. The phone
automatically resets to pulse dialing.
MEMORY DIALING
You can store up to 40 numbers in the
phone's memory locations. Then you can
quickly dial the numbers stored in these
memories by pressing one or two buttons.
The number to store can be up to 16 digits
long.
Storing Numbers into Memory
Each of the 20 memory locations can have
up to 2 phone numbers stored in it — into ei-
ther an upper or lower memory position.
Notes:
• Leave the handset in the cradle when
you store numbers.
• To prevent unauthorized access to spe-
cial services, we recommend you do not
store a personal identification number in
memory.
1. Press
PROGRAM
.
MEMORY
appears.
2. Enter the number you want to store,
including any pause/redial or flash
entries (see “Entering a Pause” on
Page 19 or “Using Flash” on Page 16).
Notes:
• To store the last number you dialed, sim-
ply press
PAUSE/REDIAL
.
• If you make a mistake while entering the
number, start again from Step 1.
3. Select the memory location where you
want to store the number.
For an upper memory position, simply
press a memory button.
For a lower memory position, press
LOWER
, then a memory button.
The telephone rings and stores the number.
Using the Index Card
1. Insert a flat-blade screwdriver into the
slot at the right side of the base’s plastic
cover, then lift the cover and remove it.
2. Write the name next to the appropriate
memory location number. The card has
an upper and lower position for each
memory location.
3. Insert the plastic cover’s tabs into the
slots on the base, align the memory but-
tons with the cover, and carefully press
down on the cover to secure it.
Содержание 4-Line System Speakerphone with Caller ID and Headset Jack
Страница 27: ...27 Notes ˆ Notes ...