This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the
FCC Rules
. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult your local RadioShack store or an experienced radio/TV technician for help.
• If you cannot eliminate the interference, the FCC requires that you stop using your headphones.
Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s
authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules
. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
the FCC wants you to know
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the
date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and
exclusions, check with your local RadioShack store.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
04/04
limited 90-day warranty
Transmitter:
Carrier Frequency ................... ....................................................................... 911.4 and 915.6 MHz
Power Source .................. ........................................................................12V DC, 250 mA adapter
Modulation Method ............... ............................................................................ ....FM Modulation
Receiver:
Sensitivity ................... ............................................................................. ...<2µV (with 20 dB S/N)
S/N Ratio (@-50dBm) ........ ............................................................................ ....>60 dB (A weight)
Audio Distortion ................... ......................................................................................... ..........<2%
Max. Audio output ............. .................................................................................................>8 mW
Channel Separation……… ........................................................... …………………………….>50dB
Operation Distance……… ............................................................... …………………………150 feet
Power requirement…… ....................... …3 AAA alkaline or rechargeable batteries (not include)
Overall Frequency Response…… .........................................................................……50Hz-20KHz
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without
notice. Images contained in this document may vary from the final product.
specifications
©2005 RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
AO0255AAA1
33-1197
09A05
Printed in China
• Try several locations for the transmitter. Select the location that provides the best
performance.
• If you connect the transmitter to an audio source headphone jack, set the audio source’s
volume control to mid-position, then adjust
VOLUME
on the headphones to the desired level.
• If the headphones’ range decreases, you do not hear sound from the audio source, or the
headphones’
POWER/BATT LOW
indicator is blinking, replace the alkaline batteries or
recharge the rechargeable batteries.
• To preserve battery life, be sure to turn off the headphones when you are not using them.
• Turn off the headphones before turning off the transmitter.
• To protect your hearing, set the volume to the lowest setting before you begin listening. After
you begin listening, adjust the volume to a comfortable level.
helpful hints
1. Press
POWER
on the transmitter. The
transmitter’s POWER indicator lights up red.
2. Turn on your audio source.
3. Adjust
VOLUME
on the headphones to a
lower level.
4. Slide
ON/OFF
on the headphones to
ON
.
5. Put on the headphones and adjust
VOLUME
to the desired listening level.
6. Slide
ON/OFF
on the headphones to
OFF
,
the Power LED turns off.
7. To turn off the transmitter, press
POWER
.
The POWER indicator turns off.
using your wireless headphones
•
To protect your hearing, follow these guidelines when you use headphones.
•
Set the volume to the lowest setting before you begin listening. After you begin listening,
adjust the volume to a comfortable level.
•
Do not listen at extremely high volume levels. Extended high-volume listening can lead to
permanent hearing loss.
•
Once you set the volume, do not increase it.
listening safely
POWER
ON/OFF
VOLUME
POWER/
BATT LOW
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (standard, alkaline, or
rechargeable), or rechargeable batteries of different capacities.
• If you do not plan to use the headphones for a week or longer, remove the batteries. Batteries
can leak chemicals that can destroy electronic parts.
• You can only charge rechargeable batteries. Do not attempt to charge alkaline batteries.
• Do not connect the transmitter to your audio source’s speaker output. Doing so could damage
the transmitter and audio source.
battery notes
33-1197.indd 2
11/02/2005 5:08:28 PM