6
Output
To play the mixer’s output through your speaker system,
use an audio phono cable (not supplied) to connect
the mixer’s
OUTPUT L
and
R
jacks to your receiver or
amplifier’s line input jacks.
Recording
To record the mixer’s output, use an audio phono cable
(not supplied) to connect the mixer’s
OUTPUT L
and
R
jacks to your recording device’s line input jacks.
Use Your Mixer
1.
Set the
POWER
switch to
ON
. To avoid popping
sounds, always turn on the mixer before you turn on
your amplifier.
2.
Turn on the output amplifier and set its volume to the
lowest level.
3.
Set the audio input source’s volume to the lowest
level. Turn on the source, and press Play (or
continuously talk into the microphone).
4.
Adjust the mixer’s corresponding
CHANNEL 1
,
2
,
3
,
or
4
to level
6–10
. When mixing more than one audio
input, adjust each input’s volume to about the same
listening level.
5.
Adjust the input source’s volume and the output
amplifier’s volume as desired.
6.
When you are finished mixing, turn off the mixer, the
output amplifier, and all audio input sources.
