9
The Basics
using your mixer
1. Set your output source’s volume to minimum and turn it
on.
2. Press
POWER
to turn on the mixer.
3. Turn on the audio input sources you want to mix.
4. Preset the input signal levels and mix your audio input
sources. Refer to the next two sections for details.
5. When you are finished, turn off all connected audio
sources (amplifiers, tape decks, and so on), and press
POWER
to turn off the mixer.
presetting input signal levels
To avoid overdriving a channel or prematurely mixing an
audio input source, adjust your mixer to these settings:
ASSIGN A
and
ASSIGN B
set to
OFF.
CH 1
,
CH 2
, and
CH 3
set to
0.
MIC TREBLE
and
MIC BASS
set to
0.
MASTER
set to about
5
.
CUE LEVEL
set to
0.
POWER
For monaural output, set
MONO/STEREO
to
MONO
.
For stereo output, set
MONO/STEREO
to
STEREO
.