2
2. Push down and to the right until it clicks
into place.
Note: To ensure proper contact between
the charger’s and the battery’s contacts,
push the battery toward the charger’s
contacts until it is secure.
To charge Canon batteries:
1. Position the
battery so
the arrow
faces up.
2. Push the
battery
down into
the lower
charging
slot and slide it forward until it clicks into
place.
To charge Fujifilm, Ricoh, JVC, and
Kodak batteries:
1. Position
the battery
so the
arrow
faces up.
2. For
Fujifilm,
Ricoh, and
Kodak
batteries,
align the
top edge of the battery with the upper
arrow on the left side of the charging
slot.
For JVC batteries, align the top edge of
the battery with the lower arrow on the
left side of the charging slot.
3. Push the battery down and forward until
it clicks into place.
To charge Sony battery packs:
1. Position the
battery with
the arrow
facing up.
2. Push the
battery
down and
forward until
it clicks into
place.
4.8V Ni-Cd, Ni-MH Batteries
1. Position the 4.8V charging adapter over
the charging slot.
2. Push the adapter down and to the left
until it clicks into place.
3. Position the
battery over
the charging
slot so the
recessed
vertical line
at the
battery’s
lower left
side is
aligned with
the recessed vertical line at the lower left
of the charging adapter.
4. Push the battery down and to the right
until it clicks into place.
7.2V Li-Ion Batteries
1. Mount the 7.2V charging adapter by
aligning the adapter’s right edge with the
red indicator.
2. Push the adapter down and to the right
until it clicks into place.
To charge Canon Digicam BP-911 and BP-
924 battery packs:
1. Align the battery’s top edge with the
lower arrow at the left side of the
charging slots.
2. Push the battery down and forward until
it clicks into place.
To charge Canon Digicam BP-80 and BP-
85, Sony, Panasonic, or Victor batteries:
1. Align the
battery’s
top edge
with the
upper
arrow at
the left
side of the
charging
slot.
2. Push the
battery down and forward until it clicks
into place.
CONNECTING POWER
You can power the charger from an AC outlet
or your vehicle’s battery power using the
supplied AC or DC adapter.
Cautions:
You must use a (Class 2 for
AC) power source that
supplies 12V DC and delivers
at least 1 amp. Its center tip must be set
to positive and its plug must fit the
charger's
DC 12V
jack. The supplied
adapters meet these specifications.
Using an adapter that does not meet
these specifications could damage the
charger or the adapter.
• Always connect the adapter to the
charger before you plug it into the power
source, and unplug the adapter from the
power source before you unplug it from
the charger.
• Before plugging the cigarette-lighter
adapter’s plug into your vehicle’s
cigarette-lighter socket, make sure the
For Panasonic/JVC
For Canon
BP-911, BP-924
For Sony, Panasonic, Canon, Victor
Red Indicator
!
