14
U
SING
S
CAN
Press and hold
e
or
d
to scan up and
down to find the desired channel and
quiet code. The radio automatically
scans through the channels and
pauses on each active channel. While
scanning, press
e
or
d
to change the
scanning direction. Press
PTT
to stop
scanning.
Ô
U
SING
K
EY
L
OCK
To lock or unlock the keypad, hold
down
FUNC
and press
PTT
to lock or
unlock the keys.
appears when the
keys are locked. When the keypad is
locked, you can still transmit (press
PTT
), send a call (press
CALL
) or
temporarily enable/disable Vox (press
PTT
when Vox level is 1–4).
Ô
U
SING
K
EY
T
ONE
AND
V
IBRATE
You can set the radio so it sounds a
tone when you press any key except
PTT
or
FUNC
.
You can also set the radio to vibrate.
When the radio is idle for 30 seconds,
the radio vibrates when it receives a
signal.
Ô
Ô
NOTE
Ô
•
The radio
automatically scans
through quiet codes
while scanning
through the
channels. The quiet
code feature
automatically turns
on when a signal is
detected on a
channel and quiet
code, and turns off
after the signal
disappears.
•
During scan, the
radio will not receive
Direct Call data.
•
If you do not press a
key after 20 seconds
when you enter key
tone and vibrate
mode, VOX mode,
APO mode, setting
Hi/Lo transmitter
power mode and
courtesy tone mode,
the radio will exit
these modes without
saving the setting.
