12
ADJUSTING THE VOLUME
The detector has four volume levels. To change the detector’s
volume, press and hold down
P
/
V
. The detector sounds a tone
at the current volume level and displays a
1
,
2
,
3
, or
4
. When
the detector reaches full volume, it displays
4
. When the
detector reaches minimum volume, it displays
1
. Release
P/V
when the volume is at the desired level.
Note: When the detector reaches either the maximum or mini-
mum volume, you must release and press
P
/
V
again to reverse
the volume direction.
DEMONSTRATING ALERTS
To familiarize yourself with the different alerts your detector
produces, you can run a demonstration. To start the demon-
stration, press and release
M
and
C
at the same time with the
detector turned on. The detector demonstrates the alerts for X,
K, Ka, safety warning, laser, and VG-2, in that order. To end
the demonstration, press
P
/
V
.
MUTING ALERTS
While a radar, laser, or safety warning alert is sounding, you
can press
M
(mute) to temporarily silence the detector for the
current alert and any new alert that is produced within 10 sec-
onds. Visual alerts are not affected.
22-1669.fm Page 12 Friday, August 6, 1999 10:13 AM
