13
2. Align the groove in each suction cup with the slots in
the bracket and slide the suction cups out until they
lock into place. Then press the rubber cushions
onto the metal tips. Finally, screw the base plate
onto the bracket through the threaded dowel.
3. Clean the selected windshield area, position the
suction-cup mount on the windshield, and press
firmly on each suction cup to secure it into place.
4. Adjust the suction-cup mount until the base plate is
level, then fully tighten the screw securing the base
plate.
5. Slide the radar detector onto the base plate until it
snaps into place.
To remove the suction-cup mount from the windshield,
lift up on the tab on each cup to release the suction.
Threaded
Dowel
Suction
Cups
Rubber
Cushions
Bracket
Base Plate
22-1660.fm Page 13 Friday, August 6, 1999 9:38 AM
