3
1
Select Location
1.
Select a convenient flat surface location for the antenna
base. Make sure the antenna:
•
does not block the driver’s view.
•
does not interfere with windshield wiper operation.
2.
Clean the surface to remove dirt.
2
Install Antenna
1.
Screw the loading coil section of the antenna onto the
thread of the mounting magnet base.
2.
Place the magnet base onto your car.
3.
Route the coax cable into the car, preferably through a
window.
If routed through the trunk or a door opening, tape the
cable securely to the door frame using a cloth-backed tape.
Cable will normally not be harmed by opening and closing
the window, door, or trunk.
Ensure that the cable is not crushed or deformed.
4.
Run the cable to your CB transceiver and connect the
coax plug to the transceiver antenna connector (see your
transceiver’s instructions).
n
Notes
:
•
Do not remove the foil covering the bottom of the
magnet structure. The foil protects car finish and
makes a good “capacitive” ground.
•
DO NOT SHORTEN THE COAX CABLE as it is the
proper length set for peak performance.