2
7.
“SCAN”:
Displays when the transceiver scans through all the channels.
B. FUNCTION AND LOCATION OF THE CONTROLS
1. “ON/OFF” Volume Control
In “OFF” position, your transceiver is off. Rotate this control clockwise to turn on your radio and
adjust the volume, until you get a comfortable listening level.
2. LCD Display
Your transceiver has a multifunctional liquid crystal display with backlight ( see “A” for detail).
3.
CH
∆∆∆∆
Button
Press
CH
∆∆∆∆
to move one channel up. Release when you reach the desired channel.
To Operate the Scan
Press and hold
CH
∆∆∆∆
or
CH
∇
∇
∇
∇
for two seconds allows the unit to begin scanning up or down
through the channels. If a valid signal is present, the radio will stop on the active channel and
remain stopped for 4 seconds. If no button is pressed, the scan mode will then immediately
resume for the next channel after the signal disappears within 4 seconds or after 4 seconds have
elapsed.
If no signal is found on a channel, the unit will immediately continue to scan when no button is
pressed.
During scan, if
CH
∆∆∆∆
or
CH
∇
∇
∇
∇
is pressed, the unit will exit scan mode and stop at the current
displayed channel.
In both cases, pressing
PTT, CALL,
and
MON
buttons will cause the scan to turn off and stop at
the current displayed channel. Press
QUIET
button during scan to stop scan and return to the
