manualshive.com logo in svg

Radio Shack 20-501, Руководство пользователя

Поделиться
Скачать
Radio Shack 20-501 Скачать руководство пользователя страница 48

Beyond the Basics

48

turning channel-storage banks
on and off

You can turn each channel-storage bank on and off. 
When you turn off a bank, the scanner does not scan 
any of the 20 channels in that bank.

While scanning, press the number key that corre-
sponds to the bank you want to turn on or off. Num-
bers appear at the top of the display, showing the 
currently selected banks.

The scanner scans all the channels within the dis-
played banks that are not locked out (see "Locking 
Out Channels"). The bank number flashes when the 
scanner scans a channel that belongs to the bank.

Notes:

•

You can manually select any channel within a 
bank, even if that bank is turned off.

•

You cannot turn off all banks. One bank must 
always be active.

locking out channels

You can increase the scanning speed by locking out 
channels that have a continuous transmission, such 
as a weather channel. To lock out a channel, manu-
ally select the channel, then press FUNC and L/O. 
L/O appears.

Содержание 20-501

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды