26
Beyond the Basics
1. Press
F/P
,
AIR
, or
HAM
.
FIrE POLICE
,
AIr
, or
HAM
appears. After about 2 seconds, the scanner
starts searching. When the scanner fi nds
an active frequency, it stops searching and
displays the frequency’s number.
• To reverse the search direction at any
time, press
or
.
• To pause searching frequencies, press
PAUSE
. PSE appears. To resume searching,
press
PAUSE
again.
• If necessary, you can select search groups
using the number keys.
2.
To search for another active frequency in the
selected band, press
or
. To search for
an active frequency within a sub-band of the
fi re/police or ham band, press a number key
to select the sub-band you want. To select a
different band and search for another active
frequency, repeat Step 1.
You can set Zeromatic on or off by pressing
FUNC
then
0
. Press
FUNC
then
0
again to reverse
the Zeromatic setting. Whenever this feature is
turned on, — — appears at the both sides of the
b
(or
t
when the scanner stays tune mode) and
the scanner stops at the correct frequency. When
you turn this feature off, — — disappears and the
scanner stops when it detects an active signal.
Zeromatic functions only in Police/Fire, Aircraft,
Amateur band, and tune operation.
In the aircraft band, press
FUNC
then press
to
start searching up from the lowest frequency or
press
to start searching down from the highest
frequency.
Содержание 20-427 PRO-2054
Страница 54: ...54 Beyond the Basics notes...
Страница 55: ...55 Beyond the Basics notes...