background image

20

Beyond the Basics

advanced scanner features

In this section of the user’s guide, you will discover the 
wide variety of features that make your scanner fl exible and 
powerful. As you master these features, you will enhance the 
value and enjoyment of owning your scanner.

channel storage banks

To make it easier to identify and select the channels you want 
to listen to, you can assign channels to up to 10 channel-
storage banks. Each bank has 100 channels. Use each 
channel-storage bank to group frequencies, such as those for 
the police department, fi re department, ambulance services, 
or aircraft. For example, the police department might use 
four frequencies in your town while the fi re department 
uses an additional four. You could program the four police 
frequencies starting with Channel 1 (the fi rst channel in bank 
1), and program the fi re department frequencies starting with 
Channel 101 (the fi rst channel in bank 2).

storing known frequencies into channels

You can locate and store specifi c frequencies into channels 
for later use. Frequencies are widely available on the 
Internet and from the FCC. To assist you in locating a desired 
frequency from the scanner’s wide range, consider using a 
frequency guide. Excellent references for active frequencies 
are the RadioShack Police Call Guide, including Fire and 
Emergency Services, and the Offi cial Aeronautical Frequency 
Directory. We update these directories every year, so be sure 
to get a current copy.

Follow these steps to store frequencies into channels.

1.  Press FUNC + PGM. PRIVATE and PGM appear.

Содержание 20-426





















































































Отзывы: