manualshive.com logo in svg
background image

3

14. Lightning — For added protection for this VCR receiver

during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the VCR due to lightning and
power-line surges.

15. Power Lines — An outside antenna system should not

be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.

16. Overloading  — Do not overload wall outlets and exten-

sion cords as this can result in a risk of fire or electric
shock.

17. Object and Liquid Entry — Never push objects of any

kind into this VCR through openings as they may touch
dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the VCR.

18. Servicing — Do not attempt to service this VCR yourself

as opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to
qualified service personnel.

19. Damage Requiring Service — Unplug this VCR from

the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:

When the power-supply cord or plug is damaged or
frayed.

If liquid has been spilled or objects have fallen into the
VCR.

If the VCR has been exposed to rain or water.

If the VCR does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as improper
adjustment of other controls may result in damage
and will often require extensive work by a qualified
technician to restore the VCR to its normal operation.

If the VCR has been dropped or the cabinet has been
damaged.

When the VCR exhibits a distinct change in perfor-
mance — this indicates a need for service.

20. Replacement Parts — When replacement parts are

required, be sure the service technician has used
replacement parts, specified by the manufacturer, that
have the same characteristics as the original part. Unau-
thorized substitutions may result in fire, electric shock,
injury to persons or other hazards.

21. Safety Check — Upon completion of any service or

repairs to this VCR, ask the service technician to perform
routine safety checks to determine that the VCR is in
proper operating condition.

22. Heat — This VCR product should be situated away from

heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

Note to the cable TV system installer:

This reminder is to call the CATV system installer’s
attention to Section 820-40 of the National Electrical
Code, which provides guidelines for proper ground-
ing and, in particular, specifies that the cable ground
shall be connected to the grounding system of the
building, as close to the point of cable entry as prac-
tical.

  

This symbol is intended to alert you to the pres-
ence of uninsulated dangerous voltage within
the product’s enclosure that might be of suffi-
cient magnitude to constitute a risk of electric
shock. Do not open the product’s case.

This symbol is intended to inform you that im-
portant operating and maintenance instructions
are included in the literature accompanying this
product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.

Warning: To reduce the risk of fire
or shock hazard, do not expose
this product to rain or moisture.

CAUTION

!

!

16-635.fm  Page 3  Wednesday, July 21, 1999  9:03 AM

Содержание 16-635

























































Отзывы: