5
SELECT OUTPUT1 /
OUTPUT 2
Select input device
Lights when input
device is selected
Turn selector on/off.
Choose the connected
input device.
Turn on/off the
connected display device.
for an input signal, then turns back on when signal is
detected.
4.
To power off the selector, press
G
on the remote
control or the selector.
G
Power
IR Receiver
Note:
• You can send one signal from the
same input device to both display
devices, or two signals from different
input devices to each display device.
• When you select a new input device, both display devices
go blank until the selector discovers the new input device.
•
The selector turns off when both
OUTPUT 1
and
OUTPUT
2
are off. Press and hold
G
for 3 seconds
to turn on the
selector.
