6
2
Use the Selector Switch
Using the remote control to operate the selector switch
1.
Press
1-4
on the remote to view the device connected to
INPUT 1-4
.
2.
Operate the device as usual.
Manually operating the selector switch
1.
Press
SELECT
on the front panel to view the device
connected to
INPUT 1-4
, in sequence.
2.
Operate the device as usual.
Replacing the Battery in the Remote Control
Your remote comes with a battery installed. Remove the plastic
tab before using the remote. Replace the battery if the remote
control stops operating properly.
1.
Press the tab on the battery compartment tray, slide the
battery compartment tray out.
2.
Insert a new 3V, CR2025 battery,
positive “+” side up.
3.
Slide the tray back into the battery
compartment until it clicks.
b
Battery Notes:
• Keep button-cell battery away from children. Swallowing a
button-cell battery can be fatal.
• Dispose of batteries promptly and properly. Do not burn or
bury them.
• Use only fresh batteries of the required size and type.
