background image

5

4.

  Adjust the antenna to a position that provides the best 

reception.

Notes: 

•  For HD reception, you need a TV with an ATSC HDTV tuner, 

an HDTV receiver, or digital Set Top box (not included).

•  Use only an adapter that supplies 12VDC and delivers at 

least 100mA. Its center tip must be set to positive and its 

plug must fit this antenna’s DC 12V jack. 

•  Disconnect the adapter from AC power before you 

disconnect it from the antenna.

Specifications

Power source ......................................................... 12V DC 100mA
Frequency Range
UHF ............................................. 470 – 806 MHz (channel 14−69)
VHF-Hi .......................................... 174 – 216 MHz (channel 7−13)
Average amplifier gain ....................................................10-14 dB
Output impedance ...........................................................75 ohms
Output return loss ............................................... 6 dB (minimum)
Noise figure ............................................................................. 4 dB
Dimensions (H×W×D) ......... 7.7×13×2.5 in. (196×330×63.5 mm)
Weight .....................................................................20.9 oz (593 g)
Specifications are subject to change and improvement without 

notice. Actual product may vary from the images found in this 

document.

Lightning Protection

Ground wires for both the mast and download should be 

copper or aluminum wire, 8 AWG or larger. Mount a grounding 

block (not supplied) as close as possible to where the download 

cable enters the house. Downlead wire from the antenna to the 

grounding block and the mast ground wire should be secured 

to the house with standoff insulators, spaced 4-6 feet apart.

Содержание 15-257








Отзывы: