Auto-Populate Presets
Use this mode to auto-populate the preset
memory with stations in range.
1. Press and hold PRESET for 3 seconds. The
SCAN icon on the display will flash.
2. During the scan, presets will automatically
be saved in sequence.
3. After scanning is finished, the radio will
tune to the first stored preset.
Listen to a Preset Station
1.
Press AM/FM to select a radio band.
2. Press PRESET
+
or
-
to find the desired
station. PRESET and your preset location
number appear.
Setting the Clock
1. With the radio off, press PRESET once.
2.
Press CLOCK ADJUST (the TUNE buttons)
up or down to toggle between 12-hour
(AM/PM) and 24-hour (military) time. Press
PRESET to confirm your selection.
3. Press CLOCK ADJUST up or down to set the
hour. Press PRESET to confirm your selection.
4.
Press CLOCK ADJUST up or down to set
the minute. Press PRESET to confirm your
selection. The radio exits clock adjust mode.
Note:
Clock adjust mode will exit automatically if
no buttons are pressed for 2 seconds.
7
