6
If already paired to a device (LED lights blue):
Press the connect button
twice
to disconnect the paired
device. LED indicator flashes blue. Press the connect
button again to enter pairing mode. The LED flashes
blue and red alternatively, then lights blue steadily once
successfully paired to a new device.
4.
To turn off the transmitter, press and hold the connect
button.
Notes:
• If your Bluetooth-enable device was previously paired with
the transmitter, they will reconnect automatically once
both are turned on.
Press the connect button once to
activate sound output.
• If the Bluetooth-enabled device does not reconnect with
the transmittter, restart the transmitter and pair your
device again.
Specifications
Power ................................................................................
5V DC 300mA
Bluetooth Protocol ..................................................
V3.0 + EDR A2DP
Operation Range ................................................................
33 ft. (10m)
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
