8
9
10
11
12
13
14
Listen to an AUX Device
For an audio device without Bluetooth
technology, use an ⅛ in. audio cable (not
included) to connect it to the radio’s
AUX IN
jack.
AUX
appears on the display.
Notes:
•
Bluetooth or FM radio mode is automatically
deactivated when
AUX IN
is connected.
•
Use the controls on your connected device
to control playback.
Set the Clock
In standby mode, the time is shown using a 12-
hour clock with green PM indicator.
1.
Press and hold
TIME
for 2 seconds to enter
time-setting mode. The hour digits flash.
2.
Press
+
or
–
to set the hour.
•
Press and hold
§
/snooze_dimmer/
for 2 seconds to reject the call.
•
When your device receives an incoming
call, the Bluetooth connection is
suspended and playback will pause.
Note:
If the connected device moves too far
from the radio, you will lose the Bluetooth
connection.
Device Not Pairing?
Many Bluetooth-enabled devices, such as
speakers, remember the most
recently paired source (music,
smartphone, etc.) and automatically
reconnect when turned on. This is
convenient, but can prevent you from
connecting to a new source.
If you can’t pair your radio, you
may need to disconnect it from its
previous source.
Disconnect Your Device
To disconnect the paired device, press and
hold the radio's
§
/snooze_dimmer/
for 2
seconds. The radio starts searching for another
Bluetooth device.
3.
Press
TIME
. The minute digits flash.
4.
Press
+
or
–
to set the minute.
5.
Press
TIME
to confirm and exit.
Set the Alarm
You can set one or two alarms.
1.
Press and hold
AL1
(or
AL2
) for 2 seconds
to enter alarm-setting mode. The hour
digits flash.
2.
Press
+
or
–
to set the hour.
3.
Press
AL1
(or
AL2
). The minute digits flash.
4.
Press
+
or
–
to set the minute.
5.
Press
AL1
(or
AL2
), then press
+
or
–
to set
the alarm source:
b
(Beep) or
F
(Radio).
6.
Press
AL1
(or
AL2
) to confirm and exit. The
amber AL indicator lights.
7.
Press
AL1
(or
AL2
) once to review the alarm
time, press it again to turn the alarm on/off.
When the Alarm Sounds
•
The respective Alarm 1 or Alarm 2 indicator
flashes. The alarm will sound for 1 hour at the
set time, and the volume increases gradually
to the maximum level.
09A15
1201682
Printed
in China
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the environment
by restricting specific hazardous materials
and products.
•
When the alarm time expires, the alarm will
sound again the next day at the same time.
•
To temporarily pause (snooze) the alarm for 9
minutes, press
§
/snooze_dimmer/
. The
alarm indicator continues flashing. You can
repeat snooze up to 7 times from when the
alarm first sounds.
•
To stop the alarm, press the respective alarm
button (
AL1
or
AL2
).
FCC Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
If you cannot eliminate the interference, the FCC requires
that you stop using your radio.
Changes or modifications
not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Limited Warranty
General Wireless Operations Inc., doing business as
RadioShack (hereafter “RadioShack”) warrants this
product against defects in materials and workmanship
under normal use by the original purchaser for
ninety
(90) Days
after the date of purchase from a RadioShack-
owned store or an authorized RadioShack franchisee
or dealer. RADIOSHACK MAKES NO OTHER EXPRESS
WARRANTIES.
This warranty does not cover: (a) damage or failure
caused by or attributable to abuse, misuse, failure to
follow instructions, improper installation or maintenance,
alteration, accident, Acts of God (such as floods or
lightning), or excess voltage or current; (b) improper or
incorrectly performed repairs by persons who are not a
RadioShack-authorized service facility; (c) consumables
such as fuses or batteries; (d) ordinary wear and tear
or cosmetic damage; (e) transportation, shipping or
insurance costs; (f) costs of product removal, installation,
set-up service, adjustment or reinstallation; and (g) claims
by persons other than the original purchaser.
Should a problem occur that is covered by this warranty,
take the product and the RadioShack sales receipt as
proof of purchase date to any RadioShack store in the U.S.
RadioShack will, at its option, unless otherwise provided by
law (a) replace the product with the same or a comparable
product, or (b) refund the purchase price. All replaced
products, and products on which a refund is made,
become the property of RadioShack.
RADIOSHACK EXPRESSLY DISCLAIMS ALL
WARRANTIES AND CONDITIONS NOT STATED IN
THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES
THAT MAY BE IMPOSED BY LAW, INCLUDING THE
IMPLIED WARRANTY OF MERCHANTABILITY AND, IF
APPLICABLE, THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE
EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE
PURCHASER OF THE PRODUCT OR ANY OTHER
PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY,
LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY,
INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
The Bluetooth
®
word mark and logos are
owned by Bluetooth SIG, Inc. and any
use of such marks by General Wireless
Operations Inc. is under license.
?
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Contact General Wireless Operations Inc. at:
RadioShack Customer Relations
300 RadioShack Circle
Fort Worth, TX 76102
07/15
www.radioshack.com
© 2015 General Wireless Operations Inc.
All rights reserved. RadioShack is a registered
trademark used under license by General
Wireless Operations Inc. dba RadioShack.
