TM
2
3
4
5
6
7
We hope you enjoy your Radio Alarm Clock with
Bluetooth
®
Speaker from RadioShack. This
radio features a 1.2” blue LED display, dual alarm
clock, built-in USB charging port, and auxiliary
input jack. Bluetooth connectivity enables you
to wirelessly stream music from your Bluetooth-
enabled device. Please read this user’s guide
before using your new radio alarm clock.
Package Contents
•
Radio Alarm Clock
•
AC Adapter
•
User’s Guide
Specifications
Power Supply ....................................DC 5V, 2A adapter
......................2 × AAA backup batteries (not included)
Output Power .......................................> 2W (10% THD)
USB Output ....................................................... DC 5V, 1A
Frequency Range ............................FM 87.5 – 108 MHz
Bluetooth Protocol .....................................................v4.0
Bluetooth Connection Range ......... > 33 ft. (10.05m)
Dimensions (WHD) ..............................5.6 × 3.4 × 3.2 in
.............................................................(14.2 × 8.6 × 8.1 cm)
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
Power Your Radio
Install Backup Batteries
Batteries provide backup power during power
outages. Settings and data memory will be lost if
both AC power and batteries are removed.
1.
Open the
battery cover.
2.
Install two
AAA batteries
(not included)
as indicated
by the polarity
symbols (+
and –) marked
inside.
3.
Replace the
battery cover.
Battery Notes:
•
Replace the batteries when the LED display
dims or the sound becomes weak or distorted.
•
Dispose of batteries promptly and properly. Do
not burn or bury them.
•
Use only fresh batteries of the required size and
type.
• Do not mix old and new batteries, different
types of batteries (alkaline or rechargeable), or
rechargeable batteries of different capacities.
•
If you do not plan to use the radio for a long
time, remove the batteries. Batteries can leak
chemicals that can damage electronic parts.
Plug the AC Adapter
Connect the supplied AC adapter barrel plug
into the
DC IN
jack on the back of the radio, and
plug the adapter into a standard AC outlet. The
LED displays the time.
1201682
User’s Guide
USB Charging Port
Connect a portable device
for charging using an USB
charging cable (not included).
FM
•
Press and hold to turn
the radio or Bluetooth
mode on/off.
•
Press to switch between
radio and Bluetooth
mode.
§
/snooze_dimmer/
•
Answer/reject a call or play/pause playback
(Bluetooth only).
•
Turn the alarm snooze on.
•
Toggle LED display brightness to high or
low (selection disabled in Bluetooth or
snooze mode, or when the alarm sounds).
TIME
Enter time-setting mode.
AL1 / AL2
Turn the alarm on /off or
set the alarm.
DC IN
Radio Alarm Clock with
Bluetooth
®
Speaker
FM
Antenna
+ / –
•
Volume control.
•
Set the time.
Microphone
/
•
Tune radio stations.
•
Previous/next track
(Bluetooth only).
Listen to Your Radio
Listen to FM Radio
1.
Press and hold
FM
for 2 seconds to turn
on the radio. The red FM indicator lights.
2.
Press
or
to tune a station, or press and
hold
or
to scan available stations.
3.
Press
+
or
–
to increase or decrease the
volume.
Listen to a Bluetooth Device
1.
Press
FM
to switch to Bluetooth mode.
The blue Bluetooth indicator flashes.
2.
Activate your device’s Bluetooth function
(refer to your device’s user’s guide).
3.
When your device locates
RS1201682
,
select it. When paired, the blue indicator
lights steadily.
4.
Turn on the audio source. You can control
your radio through your device or with the
radio’s
/
,
§
/snooze_dimmer/
, and
+
/
–
buttons.
•
If you receive a call, you can answer the
call by pressing
§
/snooze_dimmer/
and speaking into the microphone.
PM Indicator (Green)
Alarm 1 Indicator
(Amber)
Alarm 2 Indicator
(Amber)
FM Indicator (Red)
Bluetooth
Indicator (Blue)
