Radio Shack 12-250, Руководство пользователя

Страница: 30 / 52

30
Or, to add or change a code in a different posi-
tion, repeatedly press
until you see the first
unused memory location or the code you want to
change, then press
.
------
appears.
9. Use the number keys (
0
–
9
) to enter the 6-digit
FIPS code you want to store.
Notes:
• If you make a mistake while entering the code,
press to clear all digits (
------
reap-
pears), then enter the correct digits.
• To reset the Weatheradio to receive all SAME
signals within a 50-mile radius, simply enter
99
in the first memory location (see “Using the
Weatheradio’s ‘All Signals’ Code” on
Page 41).
• For easy reference, use a pencil to write down
each FIPS code you store in memory on the
supplied label. Then affix the label behind the
Weatheradio’s keypad cover.
10. Press to store the code in the Weatheradio’s
memory.
If you set the Weatheradio to its multiple mode ,
the code (if any) stored in the next memory posi-
tion appears. Repeat Steps 7–9 for each code
(up to 15) you want to change or add.
Note: When you press to store a code in the
last (15th) memory position, weather alert
YES
NO
NO
YES
YES