Radio Shack 12-2157, Руководство пользователя, Страница: 14 / 24

14
Basic Operation
SETTING THE DISPLAY
While you are playing the radio or a CD,
the display shows the tuned frequency
or information about the current CD. To
display the clock at any time while the
radio or a CD is playing, press
DISP
.
The stereo is factory set to display the
clock as a default. Follow these steps to
change the default display:
1. Turn the stereo off and leave the
vehicle’s ignition on.
2. Hold down
DISP
for about 2 sec-
onds. The digits on the display flash.
3. Within 5 seconds, press 2 RPT until
the desired display —
FRE
(Fre-
quency) or Clk (Clock) — appears.
ADJUSTING THE SOUND
When you listen to your stereo, adjust
these controls to suit your listening pref-
erences.
Preset EQ (Equalizer) — Repeatedly
press
EQ
to select the desired EQ set-
ting: FLAT , JAZ (Jazz), POP , CLAS
(Classical), ROCK , VOCAL , or BT (Bass/
Treble — EQ Off).
Note: The Bass and Treble controls are
bypassed in any EQ mode except EQ
Off.
Volume — Repeatedly press (or hold
down)
+
or
–
to increase or decrease the
volume. VOL and a volume level num-
ber (
0
–
40
) appear.
Warning: To protect your hearing, do
not listen at high volume levels. Slowly
increase the volume to a comfortable lis-
tening level.
Audio Control — Repeatedly press
SEL/LD
until BAS (Bass), TRE (Treble),
BAL
(Balance), or
FAD
(Fader) and a
number appear on the display. Then,
within 5 seconds, repeatedly press (or
hold down)
+
or
–
to change the stereo’s
settings.
Notes:
• When you adjust the balance toward
the left speakers, L and a number
(
0
–
9
) appear on the display. When
you adjust the balance toward the
right speakers,
R and a number ( 0 –
9 ) appear.
• When you adjust the fader toward
the front speakers, F and a number
( 0 – 9 ) appear on the display. When
you adjust the fader toward the rear
speakers,
R
and a number (
0
–
9
)
appear.
• If BAS , TRE , BAL , or FAD and the
number disappear before you press
+
or
–
, repeatedly press
SEL/LD
until
the setting you want reappears, then
repeatedly press (or hold down)
+ or
–
to set it.
Loudness — To enhance bass sounds,
hold down
SEL/LD until LOUD appears.
To return to normal sound, hold down
SEL/LD
until LOUD disappears.
12-2157.fm Page 14 Wednesday, March 1, 2000 7:42 AM