7
The supplied wiring harness with its 14-
pin connector includes all the lead wires
you need to connect the stereo to
ground, power, some optional compo-
nents, and speakers.
Important: Do not cut these wires. If
you cut any wire, you cannot obtain a re-
fund or exchange on this product. Ra-
dioShack will provide warranty service if
you cut a wire and find the product is de-
fective.
You might need additional wire to com-
plete the connections, depending on
your individual auto sound system. Your
local RadioShack store carries a full line
of wire and wire management accesso-
ries.
Cautions:
• You
must
connect the GROUND,
+12V TO IGNITION, and +12V TO
BATTERY wires first, then make all other
connections as described in the fol-
lowing sections before you plug the
wiring harness into the stereo. If you
do not make the connections in the
order shown, an incorrect connection
could damage the stereo.
• You must connect a separate wire to
each speaker terminal as described
in “Connecting Two Pairs of Speak-
ers” on Page 9 or “Connecting One
Pair of Speakers” on Page 10. Do
not use a common wire or chassis
ground for any speaker connection.
12-2115a.fm Page 7 Wednesday, January 12, 2000 11:18 AM
