ASW1003 [MG2475-EVK] Getting Started
V1.0 Page:12/27
7. PER(Packet Error Rate)
To measure PER(Packet Error Rate), two devices (TX-Station and RX-Station) are required.
TX-Station sends packets periodically. Many parameters - the number of transmissions, the
period, the length of a packet, etc
– can be set by user.
RX-Station receives and counts the packets. PER(Packet Error Rate) can be measured by
comparing the number of transmitted packets and received packets.
The diagram of sample application is as follows;
TX-Station
RX-Station
PC
(Terminal Program)
PC
(Terminal Program)
UART
UART
