Digital BUS-WATCH
®
53
Radio Engineering Industries, Inc.
640333
Rev 0 -- 1/1/2006
FIELD setting in the Recording Options Menu (REC MODE). The Digital BUS-
WATCH®
IV
DVR uses Hardware Field Doubling technology that doubles the amount
of record time without much degradation in audio/video quality. Other options include
changing the Recording Options to reduced frame rates (REC FPS) or increasing digital
video compression (REC QUALITY). Another option is to use the Alarm Frame Rate
Recording options as described above. Other options include using larger sized hard
drives.
Set Record Timers Screen
An example of the timer screen is shown in Figure 52. There are ten timers,
labeled T0 through T9. Each timer shows the day of the week when it is active, the
start time, the stop time, and the Enable setting. The
Y
es means that this timer is
enabled. A
N
o indicates that the timer is disabled.
Record Timers Page Screen Shot
Figure 52
Use the arrow keys and the SEL button to select the timer. The parameter being
changed, whether it is weekday, start hour, stop minute, etc., will flash. First,
select the day you wish this timer to operate. You can choose any day of the week
or the "MF" setting, which causes the timer to work on every weekday, Monday
through Friday.
All timers should be set up in advance. Any timer that is not used should be
disabled by setting it to ‘No’
(N).
