Digital BUS-WATCH
®
R1001 / R4001
Sensor
IO Input – School Bus
Figure 71: Event Setup – Sensor – IO Input – School Bus Screen Shot
The IO INPUT subsection of the SENSOR section is used to change the Vehicle
Sensor Options that are associated with the Vehicle Sensor Options Harness as shown in
Figure 15 on Page 24 and the Event Mark / External Record Indicator Harness as shown
in Figure 12 on Page 22.
The IO INPUT sections are sub-sectioned into 3 main options: SCHOOL BUS as
shown in Figure 71 above, TRANSIT BUS as shown in Figure 72 on Page 71, and
CUSTOM as shown in Figure 73 on Page 72.
The purpose of the 3 main options is for ease of setup for the installers. The
installer can wire the Vehicle Sensor Options Harness directly for the type of bus in
question, or they can use the CUSTOM settings to wire the bus any way that seems
appropriate. Using the CUSTOM setting requires data entry to be properly set.
Page 70 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007
