Digital BUS-WATCH
®
HDx00
Page 62 of 93
Radio Engineering Industries, Inc.
640430 -- Rev A -- 9/7/2012
Figure 46: Motion Setup - Set Grid
On the Set Grid screen, user can select the area that needs motion detection. Click
on camera image to activate grid and then fill the area that needs detection in green. This
allows user to apply motion detection on part of the image only.
Sensitivity: sensitivity of the motion detection function from 1-5.
Min Area: minimum area from 1 to 64 DVR sees motion before it triggers alarm.
Trigger: activate motion when selected sensor input is triggered.
Set All: set the whole image for motion detection.
Clear All: clear the all the motion detection areas.
Hide Grid: turn off the selection grid.
