Digital BUS-WATCH
®
SD40
Page 61 of 72
Radio Engineering Industries, Inc.
640434 -- Rev 0 -- 9/30/2011
Ethernet
Figure 50: Ethernet Settings
Ethernet settings is where the user set up the network configurations if using
DVR‟s Ethernet port located on the back of the DVR.
LOCAL IP ADDRESS: The local IP address needs to be set up differently
for each DVR. The IP address contains four three digit numbers from 0 to
255. The first three numbers needs to be the same as the local gateway IP
address in order to have access to the DVR. The last number must be set
up independently on each DVR.
LOCAL SUBNET MASK: A mask address is to use with the IP address as
a pair. The default setting is 255.255.255.000. Depending on how the
network is set up, the user needs to change it to work with the network.
LOCAL GATEWAY IP: Gateway IP is how a network accesses another
network. Set it up accordingly to the network.
CLIENT PORT: This is the port where the user can access DVR‟s client
function.
WEB PORT: This is the port where the user can access DVR‟s web
function.
