manualshive.com logo in svg

RADIKAL TECHNOLOGIES SAC-2K, Руководство пользователя

Поделиться
Скачать
RADIKAL TECHNOLOGIES SAC-2K Скачать руководство пользователя страница 22

SAC-2K manual

22

Information regarding use with specific programs

In this chapter you will find out how to set up software that has SAC-2K implementation to
work with the SAC-2K. In the near future additional programs will be enabled to work with
the SAC-2K. We will make according Manual additions available on our website
„www.radikaltechnologies.com“. If you do not have access to the Internet, we will be happy
to send you printed Manual additions at your request.

One common feature with all implementations is that the SAC-2K works in „slave-mode“.
The software accepts your commands sent by the SAC-2K and will send messages back to
the SAC-2K as needed. The SAC-2K stays passive. This means pushing a button on the
SAC-2K does not automatically make it light up. The light activation of the LED‘s is completely
controlled by the Software. If a particular LED does not light up after being pushed it‘s an
indication that the relevant software is not utilizing this button yet. It‘s not an indication of a
malfunction of the unit, but rather an indication of the scope of support functionality for the
SAC-2K (or lack thereof). For the next set of scenarios we are going from the assumption
that you have already connected the Controller with your Computer. If you are unsure how,
refer to the chapter „connections and operation“.

Steinberg Cubase VST 5.0

Cubase VST is fully supporting the SAC-2K starting with Version 5.0. Since the implementation
was completed towards the end of the 5.0 release, you won‘t find any information regarding
this implementation in your Cubase Manual or in Cubase‘s Online Helpline - yet. However,
the installation is not difficult and only has to be done once.
Cubase VST 5.0 PC contains a new hardware-dongle, which is connected to the Parallel-
Port. This can potentially lead to problems with various MIDI-Interfaces, which also are
connected to the Parallel-Port. For example in our tests, we were unable to get the SAC-2K
implementation to work properly in connection with an Opcode 8 Port SE Interface.

Содержание SAC-2K





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды