17
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića
- Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: [email protected]
1. Basic technical characteristics
Etaž
is a stove designed to be used for baking in the oven, cooking on the top plate and
heating through the heating appliance, that we produce in two variants:
Etaž C20
and
Etaž
C25.1
.
The total heat efficiency of
Etaž C20
is 20 kW of which 14-15 kW is the power used for
heating in the radiator, whereas the remaining is used for radiation of heat through the oven and
top plate into the room in which
Etaž C20
is located. The total heat efficiency of
Etaž C25.1
is
25 kW of which 17-18 kW is the power used for heating in the radiator, whereas the remaining is
used for radiation of heat through the oven and top plate into the room in which
Etaž C25.1
is
located.
Special structural characteristics are as follows:
-
width of the top plate: 960mm (
Etaž C20
), 1110mm (
Etaž C25.1
);
- dimension of the burning unit: 250mm X 300mm X 420mm (
Etaž C20
), 320mm X 300mm
X 420mm (
Etaž C25.1
);
- dimension of the stoking door: 205mm X 190mm (
Etaž C20
), 320mm X 200mm (
Etaž
C25.1
).
The internal walls of the boiler are made of 4mm thick steel and the volume of the boiler in
Etaž C20
is 18 litres and the volume of the boiler in
Etaž C25.1
is 20 litres. Combustion takes
place on the grills made of 18mm thick grey cast iron in
Etaž C20
and 25mm in
Etaž C25.1
.
According to the position of the flue connection, there is a left and right version of the stove.
When standing in front of the stove, if the flue connection is on the right side, it is a right-
oriented stove and vice versa.
Etaž
comes with a preinstalled air regulator for combustion, copper spiral for thermal safety
drain valve, water thermometer in the boiler.
