9
Chapter 2 Adjusting Screens
●
Performing advanced adjustments
“CAL Switch Mode” of the Adjustment menu allows you to configure and save a separate set of color
settings for each mode.
Attention
•
As it takes about 15 minutes for the performance of electrical parts to stabilize, adjust the monitor 15 minutes
or more after the monitor power has been turned on.
•
The same image may be seen in different colors on multiple monitors due to their monitor-specific
characteristics. Make fine color adjustment visually when matching colors on multiple monitors.
Note
•
The values shown in “%” or “K” are available only as reference.
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable
function.)
√
: Adjustable, - : Unadjustable
Function
CAL Switch Mode
1-DICOM
2-CAL1
3-CAL2
4-Custom
5-sRGB
6-Text
Brightness
√
√
√
√
√
Contrast
-
-
√
√
√
Temperature
-
-
√
√
√
Gamma
-
-
√
√
√
Hue
-
-
√
√
√
Saturation
-
-
√
√
√
Gain
-
-
√
√
√
Reset
√
√
√
√
√
●
Adjusting Brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Setting Range
0 to 100%
Procedure
1. Select "CAL Switch Mode" of the Adjustment menu, and choose .
2. Select “Brightness” from “CAL Switch Mode”, and choose .
3. Use
or
for adjustment.
4. Select after completing the setting.
Note
•
If you think the image is too dark even when the brightness is set to 100%, adjust the contrast.
