13
Chapter 2
Connection
English
Chapter 2 Connection
2-1. Connecting Cables
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and
vertical scan frequency to those that are available for this monitor. Refer to the compatible resolution table before
connecting the PC.
1.
Turn the monitor screen 90˚ in clockwise direction.
The landscape position is the default monitor orientation.
Attention
• Before turning the monitor screen, raise it to the highest position.
2.
Connect signal cables.
Check the shapes of the connectors, and connect the cables. After connecting the DVI cable, tighten
the fasteners to secure the connector.
Connecting a single monitor
Attention
• The DisplayPort connectors of the monitor consist of input and output . When only a single monitor is
used, connect the cable to the input connector .
Signal cable: DD300
Signal cable: PP300
or
