Radient Primal, Руководство пользователя

Страница: 3 / 12

PHYSICAL FEATURES
3
Simple • Capable • Safe
1. Status LED
a. OFF: Not in use
b. SOLID RED: Charging
c. FLASHING GREEN: Peak detection active
d. NiXX: the charger has entered Delta-Peak mode, the battery is approximately 90% charged
e. LiPo: the charger has entered CV charging mode, the battery is approximately 80% charged
f. SOLID GREEN: Charge cycle complete
g. ERROR
i. FLASHING RED/GREEN: Charger is in thermal protection mode. Charging current has been reduced to minimum to allow for
the charger to cool back down to normal operating temperatures. When charger has cooled, normal charging will resume. If
you see this error, direct a cooling fan at the charger, with the air blowing away from yourself or any flammable objects.
h. FLASHING RED:
i. Connection problem or damaged battery (check for proper polarity and balance plug connection.
ii. Input power is out of operating limits.
2. Amp LEDs
a. LEDs flash RED indicating 0.5A setting.
b. LEDs glow solid RED indicating the selected charge current.
3. Safe Start
a. Pressing simultaneously for 3 seconds with the LiPo OR NiXX button is the only way to start a charging cycle.
b. Press to
STOP charging at any time while charging.
4. Amps
a. Press repetitively to cycle through available charge rates for use with the connected battery. Stop pressing when the LED above the
desired charge rate is illuminated.
5. LiPo
a. Pressing simultaneously for 3 seconds with the ‘Safe Start’ button is the only way to start a charging cycle.
6. NiXX
a. Pressing simultaneously for 3 seconds with the ‘Safe Start’ button is the only way to start a charging cycle.
7. 2s-3s JST-XH Balance ports.
a. Connected your LiPo balance plug to the appropriate port to enable LiPo balance charging.
i. If your battery has a different connector, do not try to modify your connector or the charger. Visit your local hobby dealer and
purchase a Radient Primal Universal Balance Adapter (RDNA0003) for use with your balance plug.
8. Main charging lead
a. Connect to the main charge leads of your battery using the appropriate connector type. Visit your local hobby dealer for assistance if
the plug on your battery and charger do not match.
b. WARNING: Never try to force connectors together.
9. Charge plug adapter, High Current T-Plug
a. Connect the main charge leads of your charger to the battery for batteries using HCT compatible plugs.
b. Connect the main charge leads of your charger to the included micro/mini adapter to charge batteries with the micro/mini plug
installed. Visit your local hobby dealer for assistance if the plug on your battery and charger do not match.
c. WARNING: Never try to force connectors together.
10. AC input plug
a. For use with 2 and 3 prong grounded US receptacles (plugs) supplying 100-120V @60Hz AC power.
11. Cooling fan and vents
a. Always keep clear and never stick anything into the charger through these or any other holes in the case.