RW8300E-a-PR (USB) Designer’s Guide (RRD2Z50-20200130001)
28
Reset RW8300E-a-PR (USB-Device) to the Default
This chapter will show you how to reset and reboot RW8300E-a-PR with
multi-functional button (MFB).
※
For RW8300E-a-PR button position. please refer to chapter “WPS/RESET Button on
RW8300E-a-PR (USB-Device)” on page 15.
Reset RW8300E-NL to factory default setting
1.
Connect your device and RW8300E-NL with USB cable to power on RW8300E-NL.
and wait one minute for startup.
2.
Insert a pin into the RESET hole. long-press
RESET
button over 5 seconds. until LED
flash within 1/8 seconds. Then release
RESET
button and wait 2 minutes.
RW8300E-NL will change back to factory default setting. Once system reboots and
LED glowing more than 10 seconds. the system back to default setting successfully.
Reset RW8300E to factory default setting
1.
Plug in USB adapter to power on RW8300E. and waiting 1 minute to start system up.
2.
Insert a pin into the RESET hole (near the LAN port). press and hold the
RESET
button for 2-5 seconds. RW8300E will reboot.
