RADICAL R-C10OP2, Руководство по установке устройства

Страница: 10 / 11

6. Connect the main harness (No. 11) of
the Radical device (No. 1) to the
Fakra connector of the car and close
its locking mechanism. Connect the
CAN bus interface (No. 12) to the
main harness. Connect all the cables
to the Radical device (No. 1), and the
original antenna cables.
7. Before installing the Radical device
(No. 1) remove the two transport
securing screws.
8. Neatly arrange the wires to the side,
making room for the Radical device.
Carefully slide it into the radio slot.
Push back the R-C10OP2 until you
hear the clicking sound of the
latching mechanism.
The installation of your R-C10OP2 is
now complete.