INSTALLATION
4.
Mount the GPS antenna (No. 2) in a
suitable place and make sure that the GPS
reception is not adversely affected by the
shading of metallic parts of the vehicle (heat
insulation glazing, etc.). Then lay the
connecting cable in the radio shaft.
5.
Route the USB extension cables (#
5, 6) from the radio bay to your desired
location.
6.
Connect the respective main
connection cable (# 11) of the Radical
device (# 1) to the plug of the vehicle and
close the locking mechanism of the
connector. Then connect the CAN-BUS
interface (No. 12) to the main connection
cable. Connect all cables previously routed
in the radio slot and the original antenna
cables to the Radical unit (# 1).