RADICAL R-C10BM4, Руководство по установке устройства

Страница: 10 / 11

INSTALLATION:
7. Now take the supplied mounting bracket
(No. 15) and place it in the radio slot. Screw
these tightly with the Phillips screwdriver on the
inside of the shaft. Connect the respective
main connection cable (No. 11/12) of the
Radical device (# 1) with the Quadlock plug /
ISO of the vehicle and close the Locking
mechanism of the Plug. Connect then the CAN
bus interface (No. 14) with the Main cable.
Connect all before in the radio shaft laid cables
and the original Antenna cable with the Radical
device (No. 1).
8. Remove the two screws from the
transport lock before installing the Radical unit
(# 1).
9. Carefully lay the various connection
cables of the Radical device in the lower area
of the radio shaft. Fix the device firmly to the
center console with the two supplied screws.
Reinstall all the screws you loosened
previously and turn them tight. Then attach the
plastic panels back to their usual place.
The installation of the R-C10BM4 is hereby
finished.