RADICAL R-C10BM3, Руководство по установке

Страница: 10 / 11

INSTALLATION:
1 Now take the supplied mounting
bracket (No. 15) and place it in the radio
slot. Screw these tightly with the Phillips
screwdriver on the inside of the shaft.
2 Connect the respective main
connection cable (No. 11/12) of the
Radical device (# 1) with the Quadlock
plug / ISO of the vehicle and close the
Locking mechanism of the Plug.
Connect then the CAN bus interface
(No. 14) with the Main cable. Connect
all before in the radio shaft laid cables
and the original Antenna cable with the
Radical 1st device (No. 1).
3 Remove the two screws from
the transport lock before installing the
Radical unit (# 1).
4 Carefully lay the various
connection cables of the Radical device
in the lower area of the radio shaft. Fix
the device firmly to the center console
with the two supplied screws. Reinstall
all the screws you loosened previously
and turn them tight. Then attach the
plastic panels back to their usual place.
The installation of the R-C10BM3 is
hereby finished.