In Manual mode, the fan will not automatically adjust based on the built-in IAQ sensor.
Viewing device information
Press the Mode button (
) on the
once to display the Reactor Chamber runtime (hours).
After a few seconds, the current fan speed will display.
Press the Mode button (
) on the
twice to display the particulate matter sensor count (µg/
m3). After a few seconds, the fan speed will display.
Lock the control panel (child lock)
Hold the Power button (
) on the control panel for five seconds to lock the control panel.
While the control panel is locked, the control panel buttons will be inactive. However, the remote control can
still be used to change the device settings.
To unlock the buttons, hold the Power button on the control panel for another five seconds.
Set the timer
The VK Pro has a timer that can be set for three, six, or nine hours, after which time the device will power
off.
Select a timer setting by pressing the Timer – (
) or Timer + button (
) on the remote control or by
pressing the Timer button on the control panel (
). The display will show the following to indicate which
timer setting has been selected:
No timer/ cancel timer Device will continue to operate
Sets timer for 3 hours Device will switch off after 3 hours
Sets timer for 6 hours Device will switch off after 6 hours
Sets timer for 9 hours Device will switch off after 9 hours
Radic8
VK Pro - 1_en
Copyright © 2022 Radic8
Page 21 of 43
Содержание VK Pro
Страница 1: ......
Страница 20: ...Radic8 VK Pro 1_en Copyright 2022 Radic8 Page 18 of 43...
Страница 27: ...Internal External Radic8 VK Pro 1_en Copyright 2022 Radic8 Page 25 of 43...