Radic8 VIRUSKILLER VK 401, Руководство пользователя и инструкции

Страница: 10 / 16

10
Replacing the HEPA filter
a) Open the handle at the top of the unit
①
.
Gently slide the filter case out of the top of the unit ②
.
b) Slide out and separate the pre-filter ③ from the HEPA filter ④
c) Safely dispose of the old filter by placing it in a bag and sealing it.
d) Replace with the new HEPA filter
e) Place the filters back into the unit. Make sure that the carbon part of the filter is facing the back on
the unit. Close the handle, and the unit can be switched back on.
f) Press and hold the “up” switch on the unit for 14 seconds, to reset the filter warning timer. Now your
unit is ready for the next 2000 hrs.
The HEPA filter is not reusable and must be changed after 2000 hours of
use. The display panel will indicate a “FILt” warning. In order to change
the HEPA filter refer to Figure 1, and follow the instructions below:
1
2
3
4