POS UHF RFID SCANNER
© 2015
Radiant Sensors
.
All Rights Reserved. This information is subject to change without notice. Contact us for availability.
P
age
10
Setup
As mentioned earlier, POS UHF RFID SCANNER is quiet easy to setup and exploit. No driver is needed
to be installed before using it. Just plug the USB cable into USB port and that’s all. POS UHF RFID
SCANNER is now ready. POS UHF RFID SCANNER can be used in two different modes; Single Scanning
and Continuous Scanning.
Single Scanning Mode
In this mode POS UHF RFID SCANNER reads a single tag with each press of activation/toggle button.
The EPC of the tag is then sent to the host through USB port.
Continuous Scanning Mode
To use POS UHF RFID SCANNER in Continuous Scanning mode, press activation/toggle button and hold
it for more than 1 second. Keep holding the button and POS UHF RFID SCANNER continually reads in
range tags and sends their EPC to the host through USB port.
