Radiancy FSD+, Руководство пользователя

Страница: 16 / 32

16
5.
Press and hold the pulse switch to trigger a sequence
of therapeutic light pulses� This sequence takes a few
seconds, depending on the energy level setting (see
specifications)�
If during the pulse sequence the Light Unit Assembly
feels too hot on the skin, remove it immediately and wait
until the ready indicator lights up again�
6.
After emitting a pulse sequence, remove the handpiece from the skin for about 10
seconds to allow the Light Unit Assembly to cool down� Apply the next sequence
only when the Ready indicator lights up�
Placing the handpiece on the skin before the Ready indicator lights up may result
in unwanted side effects due to pre-heating of the skin�
7. Sequentially administer pulses on the treatment area
from right to left, in a horizontal pattern, with no overlap�
Stacking and/or overlapping may cause crusting or
blisters which could result in transient pigmentation
changes�