Radialight KUBO, Руководство по эксплуатации

Страница: 4 / 16

4
5. Hand grip 6. Intake air vent
7. Hole for pipe (for discharging condensate
outside)
8. Water tank
3. Control panel
4. Using the product
SWITCHING ON

Having plugged the plug into a socket, push the POWER button. You will hear a "bip", the display lights
up and the OPERATION LED switches on.

To switch off the product, simply push the POWER button again.
SETTING THE VENTILATION SPEED

Push the SPEED button to set the ventilation / dehumidifying speed at one of the two levels LOW or HI.
(High) The corresponding LED switches on.
SETTING THE DESIRED HUMIDITY

You can set the relative humidity of the air that you want in your room.

From a minimum of CO = continuous operation (which corresponds to 30%) up to a maximum of 90% with
steps of 10%. There is an AU position, for operating in AUTOMATIC mode (see following paragraph). To
adjust the humidity, press the HUMIDITY SETTING button a number of times. The display flashes and
after a few seconds shows the ambient air humidity. To view the humidity setting simply push the
HUMIDITY SETTING button once. Pushing it subsequently will vary the humidity setting.