Radial Engineering TONEBONE PLEXITUBE, Руководство пользователя

Страница: 5 / 20

Plexitube
True to the Music
3
Radial Engineering
7. Ch. 2 VOICING switch
Three position switch selects between boost and scoop
settings for lead channel-2. Works with the CONTOUR-2
control. Settings are;
FAT - boosts mid-range to fatten tone.
SCOOP - cuts mid-range for a chunky, high impact tone.
OUT - no effect, takes CONTOUR-2 and VOICING-2
controls out of the signal path.
8. LOW & HIGH controls
Active ‘post-distortion’ EQ control. Low will boost or cut
±14.5dB at 100Hz. Hi will boost or cut ±10dB at 4.3kHz.
9. TOP END switch
Shapes the Plexitube's overall high frequency response.
BRIGHT : +6dB boost at 10kHz, adds sparkle and extra "cut".
FLAT : no effect.
DARK : -6dB cut at 1.8kHz, compensates for overly bright amps.
10. 12AX7 vacuum tube
The Plexitube uses a tube (valve) to create harmonically
rich, bone-crushing saturation.
11. Ch. 1 & 2 LEVEL controls
Used to adjust the overall output level of each channel.
Works like a master volume control.
12. External power supply connection
15VDC (400mA) PSU connection.
13. INSERT effects loop jack
1/4" TRS insert jack allows effect pedals to be placed in the
lead channel-2 signal path. (Tip-Send / Ring-Return)
14. OUTPUT jack
1/4" jack connects to your amplifi er.
15. TOOGLE footswitch with LED indicators
Toggles between rhythm channel-1 and lead channel-2.
Two large and bright LEDs indicate the active channel.
16. TRUE BYPASS footswitch with LED indicator
When the Plexitube is bypassed, the guitar signal passes
straight through without any effect. The full size
LED
illuminates when in true-bypass mode.