Radial Engineering Ltd.
EXTC Stereo™
True to the Music
®
4
MAKING CONNECTIONS
Before connecting to the EXTC Stereo, ensure that your audio system
levels are turned down to prevent plug-in transients from damaging
sensitive components such as tweeters.
The EXTC Stereo is powered via a 15VDC center-pin positive supply
(included). There is no on/off power switch; the EXTC Stereo will be
ready to use as soon as power is connected and the Power LED on the
front panel will illuminate.
Connecting to your audio interface or mixer
The EXTC Stereo features balanced line-level inputs and outputs over
both XLR and ¼” TRS connections, making it easy to hook up recording
interfaces or mixing consoles without the need for adaptor cables.
Start by connecting a pair of line-level outputs from your interface to the
ba4dB INPUTS on the rear panel. These connections will feed
the original audio tracks from your DAW (Digital Audio Workstation) to the
EXTC Stereo and your guitar pedals.
To send the processed signal from the EXTC Stereo back to your
recording system, connect the left and right +4dB OUTPUTS to a pair of
line-level inputs on your interface and route the signals to a new stereo
track.
Connecting a mixer to the EXTC Stereo using XLR cables
Connecting a recording interface to the EXTC Stereo using TRS cables
