Radial Engineering Ltd.
HotShot 48V™ User Guide
6
Providing phantom power
For microphones that require phantom power to operate, simply press the
48V switch on the rear panel of the HotShot 48V. The red LED below this
switch will light to indicate that good phantom power is being provided.
48V
Connecting to the sound system
The HotShot 48V provides two mic-level outputs to feed multiple
destinations from the stage. Use a balanced XLR cable to connect
Output-A to your primary destination — typically this will feed FOH for
playback through the PA system.
Front of House (FOH)
Using the HotShot 48V
as a cough mute
The HotShot 48V can be used
as an on-stage mute switch
by simply leaving Output-B
disconnected from the sound
system. This allows the mic
to be silenced whenever the
toggle footswitch is depressed,
providing a simple solution
for headset and lavalier mic
users.
