Radial Engineering 8cx Скачать руководство пользователя страница 4

True to the Music

Radial Engineering Ltd.

8ox & 8cx Owner’s Manual

INTRODUCTION

Congratulations on your purchase of a Radial microphone splitter. This manual covers installation and operation for both 8ox and 8cx 
microphone splitters. We recommend that you take a few minutes to read through this manual in order to familiarize yourself with the 
many innovative features that are built in. 

Should you have questions or applications not covered in this manual, we invite you to log onto the Radial web site at www.radialeng.com 
to check the FAQ section for the latest updates. Of course, you can also send us an email at [email protected].

8ox DESIGN CONCEPT

The Radial 8ox is an eight channel, balanced microphone splitter in a compact 1RU package that divides the mic signals three ways; to 
a direct output; a direct output with ground lift; and an isolated output. A high performance bridging transformer is used on the isolated 
output to eliminate hum and buzz caused by ground loops.

Splitting microphone signals is a straight forward concept. It’s most common in sound reinforcement and live recording when the on-
stage microphones must be split to feed two mixing consoles. When done improperly, splitting a signal can dull frequency response, 
lower the output, and worst of all, cause ground loops that product buzz and hum. To avoid these pitfalls, sound reinforcement com-
panies have been building custom “splitter-snakes” for many years.

The 8ox is an off-the-shelf splitter for the rest of us allowing virtually anyone to design and assemble a splitter-snake with plug-n-play 
simplicity and professional audio quality without the need for custom metal work or complex soldering.  

Table of Contents 

Page

8ox Introduction ...................................................... 1
8ox Design Concept ............................................... 2
Basics - What is a Splitter ...................................... 2
How a Transformer Works...................................... 2
What is a Ground Loop .......................................... 2
Signal Flow Block Diagram .................................... 3
Feature Set............................................................. 4
Applications ............................................................ 6
Grounding Options ................................................. 7
8cx Introduction ...................................................... 8
8cx Installation........................................................ 9

Radial 8ox 

Rack Mount Splitter

Specifi cations and appearance are subject to change without notice.

Radial Engineering Ltd.
1638 Kebet Way, Port Coquitlam BC  V3C 5W9
tel:  604-942-1001 • fax:  604-942-1010 
email:  [email protected] • web:  www.radialeng.com

www.radialeng.com

1

8ox   and   8cx

Owner’s Manual

Eight Channel • Transformer Isolated • Microphone Splitters

Содержание 8cx













Отзывы: