7
Owner’s Manual:
5315
1784242 Rev X
ECO 18-0034
July 2018
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
This machine was shipped fully assembled.
Before plugging in the machine or attempting to operate it:
1. Open the door and locate the shipping block and rope assembly. Remove the pin as shown by
lifting straight up.
2. Remove the block by sliding outwards. Repeat steps 1 and 2 for the other side
3. Discard or store the shipping blocks and rope assemblies.
4. Set the machine on a stable, level surface and plug it in an appropriately grounded outlet (see
section 1.2, Safety Precaution Summary, for grounding information).
NOTE: If the machine needs to be shipped any time, contact Radia Products to obtain the appropriate
instruction sheet, part no. 1785025 and shipping block assembly, part no. 9784291. See section 9,
Ordering, for ordering information.
Step 1
Step 3
Step 2
3. Unpacking & Installation
